Licensed & Insured, in Hartford and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Hartford
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (959) 777-4498 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Hartford and surrounding areas · On-site visits included · Free estimate within 24h
Hartford Metal Roofing is a team of local certified professionals based in Hartford. We respond quickly in Hartford and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (959) 777-4498⭐⭐⭐⭐⭐ 4.9/5 · 339 verified Google reviews
“Our old barn roof out on the east side was leaking in three spots and we needed it done before hay season. The crew came out, walked the whole thing with me, and had new corrugated panels on in two days flat. No more buckets in the aisle, which is all I cared about.”
Commercial & Agricultural Metal Roofing
“The metal porch roof on our Victorian had a section pulling loose and water was getting behind the flashing. They re-fastened the panels, reworked the flashing, and sealed it up in one afternoon. It's an old house and they were careful with the trim, which I appreciated.”
Metal Roof Repair
“Big wooden barn, and I was worried we'd have to tear the whole roof off. They did the retrofit right over the existing shingles instead, saved us a ton of time and mess. Three guys, about two and a half days, and they hauled every scrap away. Honestly relieved.”
Metal Roof Over Shingles (Retrofit)
“After that heavy snow we had sheets of ice sliding off the metal roof right onto the walkway, scary stuff. Called these guys and they installed snow guards and ice protection along the problem side. Only complaint is it took about a week to get on their schedule, but the work itself was solid and the walkway is safe now.”
Snow Guards & Ice Protection
“Had a stubborn leak over the kitchen that two other guys couldn't find. These folks got up there, found the failed sealant around a fastener line, and fixed it with proper mastic and new screws. Rained hard two days later and not a drop. Should've called them first.”
Metal Roof Leak Repair
“We kept getting leaves and junk piling up and overflowing the gutters along the back of the house, water running right down the siding. They set us up with proper gutters sized for the metal roof and it drains clean now. Yard stays dry, no more mess.”
Gutters for Metal Roofs
“We went with standing seam on the whole house and I couldn't be happier with how it looks. They handled the snow load question upfront, walked me through the finish options, and the crew of four knocked it out in under a week. Cleaned up so well you couldn't tell anyone had been there.”
Standing Seam Metal Roofing
“New build in a residential neighborhood and I wanted metal from the start. They installed the panels, handled all the flashing and chimney details, and coordinated fine with my builder. Straightforward, no surprises on the invoice. Would use them again.”
Metal Roof InstallationReal photos of our work in Hartford · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel installation | Starting at $8/sq ft | Includes tear-off, underlayment, and trim; pitch and roof access move the price. |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners and custom flashing; dormers, valleys, and turrets add labor. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Includes panel layout and trim; historic district or HOA profile requirements can raise cost. |
| Complex or historic home installation | On estimate | Turrets, multiple roof levels, and masonry flashing need an on-site measure before pricing. |
| Travel | Included | in Hartford and surrounding Central Connecticut towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (959) 777-4498, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation, simple gable | Starting at $10/sq ft | Includes panels, clips, underlayment, and basic trim for straightforward roof pitches. |
| Standing seam installation, complex roof | Starting at $14/sq ft | Covers valleys, dormers, and multiple chimneys that require formed metal flashings. |
| Tear-off and deck repair | On estimate | We inspect the deck after tear-off and price any rot or sagging repairs before installing panels. |
| Travel | Included | in Hartford and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (959) 777-4498, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off and replacement, exposed fastener | Starting at $9/sq ft | Includes tear-off, haul-away, deck inspection, underlayment, and new ribbed panels; pitch and layer count move the price |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners, raised seams, full ice-and-water shield; material gauge and panel length drive cost |
| Metal shingle or stone-coated steel replacement | Starting at $13/sq ft | Stamped or granule-coated panels with traditional look; historic district profiles and color choices affect price |
| Decking repair found after tear-off | Priced per sheet | Rotted sheathing replaced and re-nailed; ice-dam damage at eaves is the most common finding in Hartford |
| Complex or large-scale job | On estimate | Steep Victorian roofs, multiple dormers, and barns need an on-site look before we quote |
| Estimate | Free | Response within 24 hours at (959) 777-4498, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic exposed-fastener retrofit | Starting at $7/sq ft | Includes slip sheet over one sound shingle layer and standard trim; pitch and access move the price. |
| Standing seam retrofit | Starting at $11/sq ft | Concealed-fastener panels over purlins; roof complexity and panel gauge drive the final number. |
| Purlins and deck repair | On estimate | Needed when sheathing is soft or skip sheathing is present; requires an on-site look first. |
| Travel | Included | in Hartford and surrounding Capitol Region towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (959) 777-4498, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Penetration or seam reseal | Starting at $450 | Covers one pipe boot, vent collar, or open seam, resealed with metal-rated sealant and water-tested. |
| Screw replacement and re-fastening | Starting at $650 | Pulls backed-out screws and sets gasketed replacements; price rises with roof size and access difficulty. |
| Panel replacement | Starting at $1,200 | Includes matching panel, seam opening and closing, and water test; steep or high roofs push the number up. |
| Flashing rebuild at chimney or skylight | Starting at $900 | Step and counter flashing replaced; complexity of the chimney detail and masonry condition drive the range. |
| Complex or storm-wide damage | On estimate | Needs an on-site look to scope hidden deck damage and panel count before any number is given. |
| Travel | Included | In Hartford and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (959) 777-4498, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-point leak diagnosis and repair | Starting at $450 | Includes inspection, source tracing, and a straightforward fix at a flashing, fastener, or seam |
| Fastener and washer replacement (partial slope) | Starting at $850 | Covers pulling failed screws, new washers, and re-setting to correct torque on one roof section |
| Seam repair or panel section replacement | Starting at $1,200 | Price moves with panel profile, color match availability, and how much metal must be cut out |
| Emergency tarping after storm | Starting at $350 | Same-day or next-day temporary protection, credited toward the permanent repair when booked together |
| Complex or large-scale leak pattern | On estimate | Widespread failures need an on-site look at deck condition, underlayment, and full-slope scope |
| Estimate | Free | Response within 24 hours at (959) 777-4498, no obligation to book the repair |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Shed or small garage re-fastening | Starting at $750 | Covers moderate loose fasteners and washer replacement on a low-slope residential outbuilding |
| Residential roof re-fastening | Starting at $1,200 | Full walk, loose screw replacement, and new washers on a typical house roof |
| Barn or large outbuilding | On estimate | Hundreds of fasteners and oversized screws need an on-site count before pricing |
| Storm or wind damage re-fastening | On estimate | Missing fasteners at ridge and eave, plus inspection for panel lifting and deck damage |
| Travel | Included | in Hartford and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (959) 777-4498, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof installation | Starting at $5.50/sq ft | Includes panels, fasteners and standard closures on a prepared deck |
| Ribbed R-panel roof installation | Starting at $6.50/sq ft | Wider coverage per panel, priced higher for larger shops and agricultural buildings |
| Re-fastening and repair | On estimate | Priced per screw count and roof access, inspected before a number is given |
| Tear-off and deck repair | On estimate | Scope depends on existing layers and how much sheathing needs replacement |
| Estimate | Free | Response within 24h at (959) 777-4498, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stamped steel shingle roof | From $9/sq ft | Includes tear-off, underlayment, and standard trim; pitch and deck condition move the price. |
| Stone-coated steel shingle roof | From $11/sq ft | Includes stone-coated panels and full flashing; complex roof geometry pushes it higher. |
| Slate or shake profile steel | From $12/sq ft | Includes specialty profile panels and trim; historic district detail work adds labor. |
| Retrofit over one existing layer | On estimate | Deck condition and code layer limits require an on-site look before pricing. |
| Travel | Included | in Hartford and surrounding towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (959) 777-4498, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel panel installation | Starting at $9/sq ft | Includes panels, underlayment, standard flashing, and labor on a simple gable roof. |
| Full tear-off and replacement | Starting at $12/sq ft | Adds old roof removal, deck inspection, and new flashing at all penetrations. |
| Steep or complex roof | On estimate | Turrets, dormers, multiple valleys, and tight access in Hartford raise the installed rate. |
| Repair and re-fastening | On estimate | Priced per damaged panel and flashing area after an on-site inspection. |
| Travel | Included | In Hartford and surrounding towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (959) 777-4498, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper porch or bay roof | Starting at $20/sq ft | Includes custom-fabricated copper pans, underlayment, and soldered seams for a typical Hartford bay. |
| Zinc or terne-coated steel detail | Starting at $18/sq ft | Low-slope porch and dormer roofs with seamed or soldered joints, priced by roof area and complexity. |
| Full architectural copper roof | On estimate | Turret, steep roof, or multi-plane job needs an on-site measure before we quote the fabrication. |
| Custom flashing and trim | On estimate | Shop-fabricated copper and zinc pieces priced by linear foot and the number of junctions. |
| Travel | Included | In Hartford and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (959) 777-4498, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic recoat (clean, prep, one coat) | Starting at $2.50/sq ft | Includes wash, rust spot treatment, and one finish coat on a straightforward panel roof. |
| Two-coat system with rust treatment | Starting at $3.25/sq ft | Adds rust converter, primer, and a second coat; price rises with rust severity and fastener count. |
| Custom color match or historic color | Starting at $3.75/sq ft | Tinted coating matched to original panels or district guidelines, with extra prep for trim and seams. |
| Large or heavily rusted roof | On estimate | Heavy corrosion, multiple penetrations, and access issues need an on-site look before we quote. |
| Travel | Included | In Hartford and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (959) 777-4498, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Skylight reflash | Starting at $600 | Includes curb flashing rebuild and step flashing woven into the surrounding roof panels. |
| Chimney flashing rebuild | Starting at $850 | Counterflashing set into a mortar reglet, with new step flashing and sealant at the base. |
| Valley or dormer flashing | Starting at $900 | Open or closed valley metal replaced and re-woven, with dormer sidewall flashing rebuilt. |
| Multiple penetration package | On estimate | Two or more chimneys, skylights or valleys need an on-site look before pricing. |
| Travel | Included | in Hartford and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (959) 777-4498, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pad-style guards, single roof plane | Starting at $1,200 | Covers layout, pads, and sealed fasteners over one walkway or driveway. |
| Seam-clamp guards on standing seam | Starting at $1,650 | Non-penetrating clamps sized to seam profile and roof pitch. |
| Bar and rail system | Starting at $2,400 | Continuous rails for steep roofs above doors and busy walkways. |
| Eave ice protection add-on | Starting at $450 | Eave detailing added to an existing guard layout where dams form. |
| Barn or long-run agricultural roof | On estimate | Long roof runs and high snow loads need an on-site look before pricing. |
| Estimate | Free | Response within 24h at (959) 777-4498, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and attic walk with photos and a written repair-versus-replace assessment, no obligation |
| Minor repair (fasteners, seams, flashing) | Starting at $350 | Re-fasten lifted runs, replace washered screws, and re-secure flashing; access and roof pitch move the price |
| Panel replacement (one slope or section) | Starting at $1,200 | Match and install replacement panels on the damaged elevation; discontinued profiles and color matching raise cost |
| Tree impact or structural damage | On estimate | Decking repair, panel replacement, and flashing rebuild need an on-site look before any number is given |
| Travel | Included | in Hartford and surrounding towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (959) 777-4498, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Full on-roof check of fasteners, seams, flashing, coating, and drainage with photo documentation. |
| Pre-purchase inspection | Starting at $350 | Includes written remaining service life estimate and prioritized repair budget for buyers. |
| Post-storm or insurance inspection | Starting at $300 | Targeted damage documentation with photos for insurance claims after nor'easters or ice storms. |
| Large or complex roof | On estimate | Multiple roof levels, steep pitch, or agricultural spans need an on-site look before pricing. |
| Travel | Included | In Hartford and surrounding towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (959) 777-4498, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes 6-inch seamless run, hidden hangers, and basic downspout layout on accessible single-story roofs. |
| Oversized downspouts and extra outlets | Starting at $18/linear ft | Adds 3x4 leaders and additional outlets sized for steep metal roofs and spring thaw surge. |
| Heated cable for ice dams | On estimate | Self-regulating cable, controller, and gutter mounting priced after an on-site look at eave length and circuit access. |
| Gutter guards on existing or new run | Starting at $7/linear ft | Micro-mesh or reverse-curve covers fitted to the run, priced higher where heavy maple and oak drop requires reinforced mesh. |
| Fascia repair before hanging | On estimate | Rotted fascia and soffit replacement priced per the actual condition found, since hidden rot only shows after removal. |
| Estimate | Free | Response within 24h at (959) 777-4498, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and condition report | Free estimate | On-site walk, photos of failed fasteners and flashing, written scope before any work |
| Targeted repair and re-fastening | Starting at $850 | Screw replacement, closure strips, and lap sealing, priced by roof size and access |
| Coating and restoration | Starting at $2,400 | Cleaning, rust treatment, and elastomeric coating over sound panels, priced by square footage |
| Full commercial or agricultural replacement | On estimate | Panel profile, gauge, insulation, tear-off layers, and penetration count all move the number |
| Travel | Included | in Hartford and surrounding towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (959) 777-4498, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Hartford need a crew that understands the Capitol Region's older housing stock and the weather that tests it. Our network of licensed, bonded, and insured local contractors installs, replaces, re-roofs, and repairs metal roofing on Hartford-area homes, from steep Victorian pitches in Asylum Hill and the West End to post-war capes in West Hartford and Newington. We work in Hartford, West Hartford, East Hartford, Wethersfield, Glastonbury, and the surrounding towns, where heavy tree cover, high-elevation exposure, and a large stock of aging screw-down roofs create steady demand for honest guidance.
Whether you need a full Metal Roof Installation or a targeted repair, we start by telling you what the roof actually needs. Snow load, ice dams, nor'easter wind, and humid summer storms all leave their mark here, and we match the system to the home rather than the other way around.
Most metal roof leaks we see in the Hartford area trace back to a handful of causes, and the number one culprit on 15 to 30 year old exposed-fastener roofs is fasteners backing out as their EPDM sealing washers dry, shrink, and crack. Once the washer fails, water works past the screw head. Seam separation from thermal movement opens gaps on standing seam panels, failed pipe boots and flashing let water in at chimneys, skylights, and valleys, wind-lifted panels peel back after a storm, and fallen limbs puncture panels outright. Left alone, water tracks along purlins and decking far from the entry point, rotting sheathing and soaking insulation before a stain ever shows on your ceiling.
The honest repair-versus-replace call depends on panel condition, not age alone. If the panels are sound and the problem is fasteners, a full Screw Replacement & Re-Fastening often restores a watertight roof for a fraction of replacement cost. If seams are failing across the field or the deck is compromised, replacement is the straighter answer. We say plainly which one you need.
For active leaks, call (959) 777-4498 and we will trace the source rather than patch the symptom. Our Metal Roof Leak Repair work starts with a proper inspection, and you can request a free estimate once we have identified the failure.
We install the full range of metal systems and match each to the home. Standing Seam Metal Roofing uses concealed clips and no exposed screws, making it the premium choice for primary residences. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. Metal Shingle Roofing and Stone-Coated Steel Roofing suit homeowners who want a traditional look, and Copper & Specialty Metal Roofing handles accents and historic profiles.
The comparison is simple: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs fasteners serviced over its life. Metal Roof Over Shingles (Retrofit) is a legitimate option when the deck is sound, and tear-off is the right call when it is not.
Metal roof installation is typically quoted per square foot, while repairs are often flat-rate. Final pricing depends on the roof and site conditions, including the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame every figure as a typical range rather than a firm number, because two homes on the same street can price differently once the deck is exposed.
Some carriers may offer premium discounts for metal or impact-rated roofs, though coverage and pricing decisions rest with your insurer. For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can quote your actual roof.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with the carrier, and we make no promise that a claim will be approved. Deductibles and coverage terms are set by your policy, not by us.
On permits: in most jurisdictions a permit is commonly required for a full replacement, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Hartford building or planning department before starting your project. For documentation and next steps, contact us.
Ready to get started? Hartford Metal Roofing serves in Hartford and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Hartford · Response within 24h · No commitment · ☎ (959) 777-4498
Your Free Quote Request